Product Features
1.Shape Characteristics:It has an overall stepped cone-ring-like structure. The lower part is a corrugated cylindrical base. This base has annular protrusions. The upper part is a conical or nearly conical protrusion. There’s a channel in the middle. This channel is for cables and other components to pass through.This structure makes adaptive installation with connectors easy. The conical part helps guide cables into the channel. The annular protrusions make the fitting tightness and sealing with connectors better. This structural design helps with the assembly needs of
Connector Gasket and
Connector Interface Seals.
?
2. Product Functions
1)Cable Protection:It gives physical protection to cables that pass into the connector. It stops cables from rubbing directly and scraping against the edge of the connector’s opening. This avoids damage to the cable sheath. It makes sure the cable’s insulation performance is good. It also makes sure signal and power transmission are safe. Its protective effect is the same as the safeguarding role of
Waterproof Connector Seal for vulnerable connection components.
2)Sealing and Adaptation:It fills the gap between the connector’s opening and the cable. This achieves a certain level of sealing. It blocks dust, moisture, impurities, and other contaminants from getting into the interior of the connector. This protects the electrical connection components inside the connector—like pins and sockets. It keeps the connector’s electrical performance stable. Its sealing function meets the basic requirements of Connector Interface Seals and Sealing Grommets for Connections.
3)Positioning and Organization:It keeps cables neat and orderly when they pass through the connector. It helps position the cables inside the connector. It reduces connection instability caused by cable shaking or moving. This organizational function supports the assembly efficiency of precision connectors. It’s similar to the auxiliary role of Mini Rubber Seals for Connector.
?
3. Product Performance Characteristics
1)High-Precision Adaptability:It has very high dimensional accuracy. It matches the connector’s opening and the outer diameter of the cable strictly. This makes sure it fits tightly after installation. It stops sealing failure and cable movement caused by being too loose. It also stops difficult installation or damage to cables and connectors caused by being too tight. This adaptability matches the precision standards of
Solar Connector Sealing Parts (for scenarios that need dimensional matching) and Connector Gasket.
2)Excellent Sealing Performance:The material has good elasticity and can recover from deformation. After installation, it can fill gaps effectively. It provides different levels of dustproof and waterproof performance. This blocks external contaminants from getting into the connector. Its sealing reliability is as good as that of Waterproof Connector Seal and
Outdoor Waterproof Connector Seal (for applicable protection levels).
3)Wear Resistance and Tear Resistance:It rubs with cables and the connector’s opening for a long time. It also deals with external forces—like being inserted, taken out, and vibration. So the material must be wear-resistant and tear-resistant. This makes sure its structure stays intact after long-term use. The protection and sealing functions won’t fail. This durability meets the service life requirements of Interface Sealing Parts in high-frequency use scenarios.
4)Environmental Stability:It keeps stable performance under different environmental conditions. Like different temperatures, humidity levels, and chemical substances. For example, in automotive electronics, it must stand high temperatures and oil contamination in the engine compartment. Its physical and chemical properties—like elasticity, strength, and chemical inertness—won’t get worse significantly. This stability meets the environmental adaptability standards of Outdoor Waterproof Connector Seal (for harsh environment applications).
5)Electrical Insulation:When used in connectors for electrical connections, it must have excellent electrical insulation performance. This stops leakage and short circuits. It makes sure equipment and personnel are safe. Electrical performance indicators—like insulation resistance—must meet the corresponding industry or product standards. This insulation property is a key requirement for Sealing Grommets for Connections and Connector Interface Seals in electrical systems.
6)Low Deformation and High Resilience:When it’s under external forces—like cable pulling and installation compression—it only deforms a little, and this deformation is controlled. After the external force is gone, it can bounce back to its original shape quickly. This lets it keep protecting and sealing cables and connectors all the time. This resilience is as good as that of high-quality Connector Gasket materials.
7)Chemical Compatibility:It works well with the media it contacts chemically. Like cable sheath materials, connector housing materials, and cleaning agents or coolants it may touch. It won’t swell, get corroded, or have chemical reactions. This makes sure its own performance and the performance of surrounding components stay stable. This compatibility matches the material standards of Solar Connector Sealing Parts and Interface Sealing Parts in complex chemical environments.
Contact Now